A complete kit ready for easy installation.
A TYPICAL “SAVE U KITCHENS DIY KIT” IS AROUND 4-5 CARTONS WITH:
Instructions
Custom Doors
Drawer fronts
False fronts
Door pulls
Screws
Locator jigs to simplify installation
QR codes to video instructions
Matching paint for existing cabinet boxes
FREE SHIPPING!
The surface of our doors is a high-tech super film, manufactured in Europe. It is scratch and abrasion-resistant, stain-resistant, chemical resistant, light-fast and easy to clean. Water beads up and runs off. The material won’t fade or yellow. It’s unaffected by 212° dry heat or steam and contains no plasticizers or formaldehyde. The technical specifications are: • Chemical resistance: 1C DIN 68861/1 • Abrasion resistance: Min 400 turns Tabor abrasion CS 10 • Water Resistance: Impervious to long term exposure • Dry Heat: Unaffected at 212 degrees Fahrenheit (100C) DIN 68861/7 • Wet Heat (Steam) Unaffected at 212 degrees Fahrenheit (100C) DIN 68861/8 • Lightfastness >5 ISO 4892-2 DIN EN 105 B 02 This high-performance film encases very stable core materials. You can feel the quality of the materials in the weight of the doors. Our center panel cores are high-end particleboard. They are CARB phase two II Compliant (California Air Resources Board), so they meet the highest governmental standard for product quality. The board is made from the shavings of a lumber mill that makes structural lumber for home buildings. Because it contains 100% recycled/ recovered fibers, it is Eco-Certified by the Composite Panel Association, signifying compliance with the highest industry measure of environmental responsibility. The particleboard also complies with ANSI A208.1-2009 specifications. Our door moldings are machined from high-quality, very consistent fiberboard, made from southern yellow pine from sustainable managed forests. Like our center panels, they are CARB II compliant and made of 100% pre-consumer reclaimed fibers. These materials meet ANSI 208.2-2016 quality standards. Our doors can contribute to both LEED and National Green Building Standard credits to certify your project as an example of excellent environmental stewardship. Contact Sales@Saveukitchens.com for more details about environmental credits. |
SHAKER: FLOUR
SHAKER: NIMBUS OAK
SHAKER: SABLE OAK
SHAKER: ESPRESSO WALNUT
SHAKER: MIST
SHAKER: STORM
SHAKER: GRAPHITE
SHAKER: PAINT READY
SLAB DOORS
TECHNICAL SPECIFICATIONS
- Door thickness 5/8” (nominal)
- Core construction
- Composite real wood panels with high recycled content
- Top and Bottom surfaces
- Top and bottom of panel covered in decorative surface with wood prints or solid colors
- Melamine saturated laminate permanently
- adhered to core by thermo-fusion process
OR
- Waterproof film glued to surface with heat and water-resistant thermoset glues. Glue must not reactivate or release at high temperatures.
- Edge surfaces
PERFORMANCE REQUIREMENTS
- All edges are covered with thermoplastic composite materials adhered with heat and water-resistant thermoset glues. Glue must not reactivate or release at high temperatures.
- Cabinet doors shall be highly resistant to heat, water, warping & fading
- Resist damage from heat sources including dishwashers, ranges, and self-cleaning ovens
- Cabinet doors shall be unaffected by exposure to 210 degrees Fahrenheit for a period of 4 hours.
- Resist damage from steam, splashed water, condensation, and ordinary kitchen use
- No fading or yellowing from exposure to light, after test simulating 10 years of direct sunlight, 8 hours per day.
- Door surface finish material shall have permanent, 100% water holdout.
Color change (delta E) shall be <1.0 when door surface is exposed to 200 hours of Xenon arc light in conditions of accelerated weathering per IOS 4892-2:2013 test
SLAB: FLOUR
SLAB: PLATINUM TEAK
SLAB: URBAN TEAK
SLAB: MOCHA TEAK
SLAB: STORM
SLAB: SNOW GLOSS WHITE
SLIDE DOORS
The surface of our doors is a high-tech super film, manufactured in Europe. It is scratch and abrasion-resistant, stain-resistant, chemical resistant, light-fast and easy to clean. Water beads up and runs off. The material won’t fade or yellow. It’s unaffected by 212° dry heat or steam and contains no plasticizers or formaldehyde. The technical specifications are:
• Chemical resistance: 1C DIN 68861/1
• Abrasion resistance: Min 400 turns Tabor abrasion CS 10
• Water Resistance: Impervious to long term exposure
• Dry Heat: Unaffected at 212 degrees Fahrenheit (100C) DIN 68861/7
• Wet Heat (Steam) Unaffected at 212 degrees Fahrenheit (100C) DIN 68861/8 • Lightfastness >5 ISO 4892-2 DIN EN 105 B 02
This high-performance film encases very stable core materials. You can feel the quality of the materials in the weight of the doors. Our center panel cores are high-end particleboard. They are CARB phase two II Compliant (California Air Resources Board), so they meet the highest governmental standard for product quality. The board is made from the shavings of a lumber mill that makes structural lumber for home buildings. Because it contains 100% recycled/ recovered fibers, it is Eco-Certified by the Composite Panel Association, signifying compliance with the highest industry measure of environmental responsibility. The particleboard also complies with ANSI A208.1-2009 specifications.
Our door moldings are machined from high-quality, very consistent fiberboard, made from southern yellow pine from sustainable managed forests. Like our center panels, they are CARB II compliant and made of 100% pre-consumer reclaimed fibers. These materials meet ANSI 208.2-2016 quality standards. Our doors can contribute to both LEED and National Green Building Standard credits to certify your project as an example of excellent environmental stewardship.
SLIDE: FLOUR
SLIDE: ESPRESSO WALNUT
SLIDE: STORM
SLIDE: GRAPHITE
STEP DOORS
STEP D The surface of our doors is a high-tech super film, manufactured in Europe. It is scratch and abrasion-resistant, stain-resistant, chemical resistant, light-fast and easy to clean. Water beads up and runs off. The material won’t fade or yellow. It’s unaffected by 212° dry heat or steam and contains no plasticizers or formaldehyde. The technical specifications are:
• Chemical resistance: 1C DIN 68861/1
• Abrasion resistance: Min 400 turns Tabor abrasion CS 10
• Water Resistance: Impervious to long term exposure
• Dry Heat: Unaffected at 212 degrees Fahrenheit (100C) DIN 68861/7
• Wet Heat (Steam) Unaffected at 212 degrees Fahrenheit (100C) DIN 68861/8 • Lightfastness >5 ISO 4892-2 DIN EN 105 B 02
This high-performance film encases very stable core materials. You can feel the quality of the materials in the weight of the doors.
Our center panel cores are high-end particleboard. They are CARB phase two II Compliant (California Air Resources Board), so they meet the highest governmental standard for product quality. The board is made from the shavings of a lumber mill that makes structural lumber for home buildings. Because it contains 100% recycled/ recovered fibers, it is Eco-Certified by the Composite Panel Association, signifying compliance with the highest industry measure of environmental responsibility. The particleboard also complies with ANSI A208.1-2009 specifications. Our door moldings are machined from high-quality, very consistent fiberboard, made from southern yellow pine from sustainable managed forests. Like our center panels, they are CARB II compliant and made of 100% pre-consumer reclaimed fibers. These materials meet ANSI 208.2-2016 quality standards. Our doors can contribute to both LEED and National Green Building Standard credits to certify your project as an example of excellent environmental stewardship.
STEP: FLOUR
STEP: NIMBUS OAK
STEPS: ESPRESSO WALNUT
PULL OPTIONS FROM CLASSIC TO MODERN
ARCH: CHROME
ARCH: MATTE BLACK
ARCH: ROSE GOLD
ARCH: SATIN NICKEL
ARTISAN: CHROME
ARTISAN: MATT BLACK
ARTISAN: ROSE GOLD
ARTISAN: SATIN NICKEL
SQUARE: CHROME
SQUARE: MATT BLACK
SQUARE: ROSE GOLD
SQUARE: SATIN NICKEL
HARDWARE SIZES:
ARCH:
ARTISAN:
SQUARE:
BAR:
ASSESERIES:
6-WAY AJUSTABLE SOFT CLOSE HINGES
These top-of-the-line hinges provide a luxurious, near-silent close that the neighbors won’t hear. 6-way adjustable. The soft-close mechanism can be switched on and off. Lifetime guarantee.
STANDERED 6-WAY AJUSTABLE HINGES
Good quality, self-closing, 6-way adjustable hinges. Not visible when the door is closed. Lifetime guarantee.
BUMPERS:
Sold in sheets.
PAINT:
Our all surface enamel is engineered for exceptional durability in indoor and outdoor uses. Resists sunlight and moisture. Sticks to any surface that is scuff sanded until it had a dull appearance. As a waterborne coating, it offers easy cleanup until it cures.
PAINTERS TAPE:
To protect adjacent surfaces when painting cabinet frames.
MOUNTING TAPE:
Double-sided mounting tape simplifies positioning a drawer front perfectly on a drawer box. Apply the mounting tape to the drawer front, align the front with the surrounding doors and drawers, and then press the front against the drawer box. The mounting tape will hold the proper position while you drive screws and install pulls. Clear, to be inconspicuous. 1” x 60” will position approximately 30 drawers.
TOUCH-UP MARKERS:
Quick fix for minor scratches caused by installation or regular use.
SCREWS: #7 X ¾
High-quality, heat-treated screws for attaching hinges. Bags of 60.
SCREWS: #8 X ¾” & #8 X 1” WASHER HEAD
High-quality, heat-treated screws for attaching drawer boxes to drawer fronts with 1¼” hinge overlay and ½” drawer boxes. Use Phillips or Posidrive screwdrivers.
Sold in bags of 60 and bags of 30 for 1”.
SCREWS 8/32 X 1¼” MACHINE SCREWS
High-quality, heat-treated screws for attaching pulls to drawer fronts.
Use Phillips or Posidrive screwdrivers. Sold in bags of 30.
HASSLE-FREE KITCHEN AND BATH RENOVATIONS
SAVE U KITCHENS has simplified upgrading one kitchen, or a whole community. Place your order on our website, and we will calculate the amount of paint, pulls, hinges, and other accessories you need for your job. In about a week you’ll receive a kit for each apartment, with everything needed for a quick and painless installation. We’ve planned every step, with complete customer satisfaction as our goal. Unit by unit, we make it easy.
1. SELECT
Select Color and Door Style along with the pulls that suit your community, from more than 70 beautiful options.
2. MEASURE
Measure the sizes of your doors, We provide a form to make it easy.
3. ORDER
Order online, answering simple, step-by-step questions.
4. RECEIVE
Receive a complete kit for each apartment, in 5-8 business days.
5. INSTALL
Use our materials, tools, and instructions for trouble free installation.
6. ENJOY
Satisfaction guaranteed or your MONEY BACK!!!
PRICING!
We work hard to make everything easy for you, including FREE SHIPPING!
$65 per door of any color, style door and sizes up to 43”
Count the number of cabinet doors & drawer fronts you want to change
Pay and then submit your size form!
Minimum order quantity is 20 Doors, we include free shipping to the lower 48 states and an installation tool kit valued at $150.
Limitations:
- Sales tax additional in some states
- Any door with a dimension larger than 43” counts as two doors.
- Peel & Stick films for old cabinets, high-gloss doors, and accessory moldings at additional cost.
This price includes:
- Your choice from more than 30 door style and color combinations
- Your choice from more than 50 pull styles, finishes, and sizes
- Color-matched paint for your old cabinet boxes
- Deluxe, soft-close, hidden hinges
- Screws and rubber bumpers
- Installation tools including a drop cloth, paint brush, paint roller, screwdriver, drill bits, and locators to assist drilling
- Installation instructions including how-to videos for all critical steps.
- A customer service support team to answer your questions.
- Your satisfaction guaranteed: If you are unsatisfied after you install our kit, we will make it right or you can return it for a full refund.